READ ALL TECH NOTES!
1984-2017 Harley Softail Models
1991-2017 Dyna FXD / FXDWG with forward controls only
Custom Choppers with either left or right side drive.
1986-2017 Sportster models with forward controls only
All Touring Models 1984-2016
Bobber / Chopper / Custom Bike Motorcycle
** Tech Note: These will not work with mid controls that are in the way of these pipes.
** Tech Note: These have 18mm 02 ports. We have a separate auction without O2 sports if your motorcycle does not use O2 sensors.
** Tech Note: In many cases the generic bracket that holds the pipe together will NOT work. You have to rig the bracket or make something. It's pretty simple as you only need to figure out a method to secure the two pipes to each other and not the frame.
** Tech Note: Look at the Dyna pictured. On this Dyna and probabaly touring models you will not be able to access the oil cap without lossening or removing the pipes. They are so light and easy to remove, it really shouldn't be a big deal. Also on the newer Dynas, whens stock air cleaner pictured is being used, you may need to notch or clearance the stock air cleaner.
** Tech Note: These were not intended for Dyna or Touring models. You may need to make minor adjustments/modifications for an exact fit. ALL models with 12mm o2 sensors (most 2010 to present bikes) will require either a power commander which eliminates the o2 sensors or an adapter kits which size down the 18mm ports to 12mm and include wiring extensions.
** Tech Note: Check inside O2 Bungs to make sure hole is large enough for O2 sensor. Sometimes they will need to be enlarged using a die grinder or dremell.
** Tech Note: Run chase through thread in O2 bung prior to installation of sensor or plug.