Antique Vintage Replica Chrome 26" 6" Over Stock Springer Fork Front End Custom

BRAND NEW

PART# 35239

FITS: MOST HARLEY DAVIDSON MODELS WITH 1" STEM, CUSTOM APPLICATIONS SUCH AS BOBBER OR CHOPPER, & MANY OTHER CUSTOM MOTORCYCLE FRAMES, ETC...

**(BE SURE TO CHECK YOUR BIKE OR BUILD TO ENSURE FIT!!)**

  SPECIFICS: 

Notice our manufacturing of this replica v-twin springer front end comes complete and includes upper and lower brass zerk grease fittings, with chrome top tree clamp, chrome retaining nut, chrome top crown nut, a 3/4" front axle kit which includes: axle, (2) chrome acorn style end nuts, wheel spacers that can be cut to required length, & various washers/shims. (please note wheel spacers may not be the correct size for your bike or project)

This is the size that is stock on a modern Softail custom FXST or FXSTC. Also stock size on modern springer FXSTS. We consider this 4" over stock length.  

This works best on rigid & Softail frames using either a 16" or 21" wheel with 2" up stretch or maybe 34 degree rake with a 16" wheel. 

Length: 26"  (center of axle to bottom of lower tree or 25" to where tree sits against the bearing)

Approximate total length: 36"-37"

Neck stem: 1" 

Inside width of rockers: approx. 8-1/4"

Axle diameter: 3/4" o.d.

***Tech note: Installation on some stock models like dyna, touring, sportster, etc may require frame and/or tank modification as well as replacement of other components.

***Tech note: If using an aftermarket/custom frame with external neck cups you may have to lathe or trim the springer retaining nut down for proper fitment of top tree clamp and crown nut!