Andrews Products grinds its cams with the help of a computer with cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat-treating process are utilized. Furthermore, the power in Harley's Twin Cam engine can be made even more convincing when superior Andrews computer-designed high-performance cams are installed.
FITMENT:
216326G & 216326 - All 07-17 Twin Cam & 06 Dyna Glide
288126G & 288126 - 99-06 Twin Cam (Except 06 Dyna Glide)
NOTES:
NOTE: All Andrews gear-driven cams require four-gear set for installation (DS-199532 for 99-06 applications; 0925-0166 or 0925-0152 for 07-17 Twin Cam and 06 Dyna applications).
NOTE: Chain Driven Cams: 00-06 model cams use a splined cam drive sprocket. These cams will fit in the 1999 Twin Cam motor, but the splined cam drive sprocket OEM #25716-99 or DS-199175 must be used.
NOTE: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
NOTE: 59G, 60G and 64G cams are for highly tuned engines and require the knowledge of an expert engine builder for proper setup and installation.
SPECIFICATIONS:
Good power from 1800-5500 rpm
Works well with carbs or fuel injection
Bolt-in cam for lower rpm torque on heavier bikes
For two-up touring
Can be used with stock springs and tappets
| Open | Close |
Duration @ .053" |
Duration @ .020" |
Valve Lift |
Lift TDC |
|
| Intake | 11 | 35 | 226 | 262 | .490" | .129" |
| Exhaust | 41 | 09 | 220 | 266 | .490" |
.112" |