My Cart

Close

Brock's Performance Triple Tree Reversible Bottom 207mm 2.375" Offset Harley 87+

Manufacturer: Brock's Performance

$729.00

636328
Quantity
- +

BRAND NEW

PART # 636328

Known Fitment Applications:

Harley-Davidson® FXR™ (87-94) (Including CVO)
Harley-Davidson® Dyna™ (90-17)
Harley-Davidson® Sportster™ (87-03)

All remaining years of FXR™, Dyna™ and Sportster™ will accept the clamp with small modifications. The clamp will also fit custom applications utilizing a 1” DIA Harley-Davidson® steering stem. This is a bolt on application for any frame with the fork stop on the front of the neck; all other frames will require a fabricated fork stop.


Direct bolt-on triple clamp for popular Harley-Davidson® models
Allows use of popular OEM upside-down (inverted) sportbike forks
As seen on Jody Perewitz Land Speed Bike and Skeeter Todd's Custom Built FXR124
Reversible lower clamp for maximum fork height adjustability
Lower clamp is tapped for fork stops and a clearance hole for headlight mounting
Upper clamp is tapped for headlight eyebrow
Accepts handlebars with a 3.5" center-to-center spacing
Threaded steering stem and jam nut to allow proper setting of bearing preload
Steering stem is threaded 5/8"-18 for steering stem bolt
Two (2) 5/16”-18 threaded holes for fork stops
One (1) 3/8” clearance hole for headlight mounting
Uses OEM H-D® (1" ID) bearings and seals (not included)
Stock Dyna™ offset of 2.375" for 18"+ wheels sizes
207mm fork spread center-to-center (e.g. 2001-2006 GSX-R1000)
CNC machined 6061-T6 billet aluminum upper and lower clamps
300 series stainless steering stem
All stainless steel hardware
Laser engraved logo
Natural finish
Weighs only 5.8 lb.
Designed, machined and assembled in the USA


Brock’s Performance has professionally designed and fabricated V-Twin Triple Trees with Reversible Bottom Clamp which will allow conversion of select Harley-Davidson® FXR™, Dyna™ and Sportster™ forks to late model upside-down (inverted) sportbike forks to take your riding to the next level. These triple clamps not only allow the use of readily available OEM forks (GSX-R1000, Hayabusa, etc...,) but also simultaneously add the ability to use corresponding wheels and brakes, increasing overall suspension performance and comfort while providing world class braking options. Featuring zero (1-1) rake and the stock 2 3/8" Dyna offset, we also accommodate the stock fork stops and lock (when possible). Available in 50/54 with a 207mm spread (GSX-R1000) and 50/55 with a 214mm spread (Hayabusa). See overview and technical tabs for more info. Proudly made in the USA.
Powered by SureDone