ELECTRICAL

BRAND NEW

PART# 1688

USB Power Source

Two USB ports (bottom = 1.0A and top = 2.1A) provide enough output for charging any modern device, including tablets. 

Mount anywhere you choose including inside your tour trunk, on the dash, or on your handlebars.

BRAND NEW

 PART# 2598

Fits 2014-2018 Harley Road King & Police Models with 4-Wire Plug

Safely and effectively apply the load from your trailer lighting to the battery and not to the rest of the bike's electrical system.

Eliminate overloading stock lighting or accessory circuits.

Our relay harness utilizes inputs from the motorcycle to direct power from the battery to the appropriate trailer lighting circuit.

BRAND NEW

 PART# 309-562

Fits:

2014 - 2016 Touring Models - Air & Twin Cooled (Throttle-by-Wire)

2014 - 2016 Touring Trike Models - Air & Twin Cooled (Throttle-by-Wire)

ThunderMax is an industry award winning, performance ECM designed specifically for EFI equipped Harley Davidson motorcycles. This highly advanced, stand-alone tuning system utilizes proprietary AutoTune technology with wide-band oxygen sensors to deliver unmatched performance and rideability. ThunderMax comes 100% assembled, ready to install with no wire-cutting or splicing required. Simply replace the factory ECM and oxygen sensors, load a map, and enjoy your new ride!

ThunderMax Benefits Include:

Easy to Install & Simple to Use

Increased Engine Performance & Motorcycle Rideability

Cooler, Smoother Running Engine

Adjustable Idle Speed & Rev Limit Control

No Dyno Required - Automatically Tunes for Riding Style & Riding Conditions

Never Outgrow It - Easily Accomodates Bike Changes (Pipes, Cams, and More)

100% Engineered & Made in the USA

3-Year Factory Limited Warranty

ThunderMax System Includes:

ThunderMax Performance Engine Control Module (ECM)

Two (2) Wide-Band Bosch 5-Wire Oxygen Sensors (18mm) with AutoTune Connection Harness*

USB Communication Cable

TMax Tuner Software Disc

ThunderMax Quick Start Easy Install and Printable Comprehensive User’s Manual

Each basemap has all of the items below optimized for you. The user-friendly ThunderMax software allows access to these adjustable features and gives you the ability to control nearly every parameter of the system for simple adjustments or for custom tuning.

Adjustable Rev Limit, Idle Speed, and Speedometer Calibration

Adjustable Closed-Loop AFR Targets for Power and Fuel Mileage

Adjustable Ignition Timing (Spark) Maps - Globally or by Specific Throttle Position with Engine Temperature Input

Adjustable Engine Temperature Alert Alarm

Adjustable Injector Size Compensation

Adjustable Start Maps (Start Fuel Pulse) and Warm-up Settings

Adjustable Accel Pump Simulation

Adjustable Decel Pop Control

New Rider Programming Mode Feature - Store up to 5 basemaps and access them PLUS the ability to change idle speed, speedometer calibration and clear AutoTuned adjustments ALL without linking to a computer. Select models only.

H-D Digital Tech Compatible

Read & Clear Diagnostic Codes through Odometer Window, Digital Tech or Through the ThunderMax Software.

Records Running Statistics Every 100 RPM / Engine Temperature Logs

Live, Real-Time Engine Tuning

Live, Real-Time Monitoring

Live, Real-Time Recording

Map Analyzer feature assesses AutoTuned map adjustments in a snapshot to simplify map analysis

AutoMap Creator feature speeds AutoTune mapping and improves the tune of any engine and exhaust pipe combination using the learned autotune adjustments.

For 2014 - 2016 Touring Models: ThunderMax includes wide-band, 5-wire oxygen sensors that thread into 18mm x 1.5mm bungs located near the exhaust port, same thread size and location as stock narrow-band, 2-wire sensors used on 2008 and 2009 Touring model exhausts. Starting with 2010 models, all Touring bikes are equipped with a catalytic converter in the headpipe collector area. The oxygen sensors used by H-D on 2010 and later Touring models are smaller (12mm threads) heated 4-wire, narrow-band sensors located just forward of the catalytic converter near the transmission. The ThunderMax sensors must be mounted in the 2008-2009 location, up near the cylinder head exhaust port. If you are retaining the original equipment 2010 and later exhaust header or have already purchased a pipe configured for 2010-up style 12mm sensors, 18 x 1.5mm bungs will need to be added to the existing headers in the upper location (near the exhaust port as on 2008 and 2009 models), with the lower 12mm sensors removed and ports capped. If using a not-yet-purchased aftermarket exhaust pipe, order an exhaust system for a 2009 model (pipe fitment is the same for 2010-2014 models) and your ThunderMax sensors will install without modification. If you already have an aftermarket exhaust designed for a 2010 and later model Touring bike, you will need to install bungs as mentioned previously if the system is not equipped with dual bung locations.

This product is intended for "RACE READY" vehicles only and is not for sale or use on vehicles otherwise subject to emission control requirements.  In the state of California, this product should not be used on any vehicle that is registered for use on public roads. Please view the ThunderMax 50 application guide for "STREET APPROVED" & ARB compliant products.

VT No: 32-1497 

Side valve alternator kit includes a solid state regulator and is for 45", 74" and 80" models. The 12V alternator includes correct gear with slinger for side valve Flathead models. 

Order correct mount screws separately. 

VT No: 32-1873 

This 32E alternator kit includes a black 12V alternator, with a chrome end cover, black finned solid state regulator and a gear kit for OHV models. 

Order mount screws separately. The alternator is drilled for 1/4-24 or 5/16-24 threaded screws. *NOTE: The finned regulator will have to be relocated from position of original relay on the right of the cam cover. 

Fits:

FL 1948-1969

EL 1948-1953 

BRAND NEW

 PART# 2596

Fits 2014-2018 Harley Touring Models with 4-Wire Plug (Except Road King & Police Bikes)

Safely and effectively apply the load from your trailer lighting to the battery and not to the rest of the bike's electrical system.

Eliminate overloading stock lighting or accessory circuits.

Our relay harness utilizes inputs from the motorcycle to direct power from the battery to the appropriate trailer lighting circuit.

BRAND NEW

 PART# 2595

Fits 2014-2018 Harley Touring Models with 5-Wire Plug (Except Road King & Police Models)

Safely and effectively apply the load from your trailer lighting to the battery and not to the rest of the bike's electrical system.

Eliminate overloading stock lighting or accessory circuits.

Our relay harness utilizes inputs from the motorcycle to direct power from the battery to the appropriate trailer lighting circuit

BRAND NEW

 PART# 2597

Fits 2014-2018 Harley Road King & Police Models with 5-Wire Plug

Safely and effectively apply the load from your trailer lighting to the battery and not to the rest of the bike's electrical system.

Eliminate overloading stock lighting or accessory circuits.

Our relay harness utilizes inputs from the motorcycle to direct power from the battery to the appropriate trailer lighting circuit.

BRAND NEW

 PART# 2599

Fits 2014-2018 Harley Tri-Glide & Freewheeler Models with 4-Wire Plug

Safely and effectively apply the load from your trailer lighting to the battery and not to the rest of the bike's electrical system.

Eliminate overloading stock lighting or accessory circuits.

Our relay harness utilizes inputs from the motorcycle to direct power from the battery to the appropriate trailer lighting circuit.

BRAND NEW

PART NUMBER: GB20

BRAND NEW IN FACTORY PACKAGING. WE ARE AN AUTHORIZED DEALER

400 Amp UltraSafe Lithium Jump Starter

The GB20 is a portable lithium-ion battery jump starter pack that delivers 400-amps (4,650 J3S) for jump starting a dead battery in seconds. It features a patented safety technology that provides spark-proof connections and reverse polarity protection making safe and easy for anyone to use. It's a powerful battery booster that doubles as a portable power source for recharging USB devices, like a smartphone, tablet and more. And designed for a car, boat, motorcycle, RV and more with gas engines up to 4 liters.

A lithium battery jump starter rated at 400 Amps (4,650 Joules3S).

Spark-proof connections and reverse polarity protection.

Recharges USB devices, like smartphones, tablets, and more.

100 lumen LED flashlight with multiple modes, including SOS.

Jump starts gas engines up to 4 liters.

Provides up to 20 jump starts on a single charge.

PART NUMBER: GB40

BRAND NEW IN FACTORY PACKAGING. WE ARE AN AUTHORIZED DEALER

1,000 Amp UltraSafe Lithium Jump Starter

The GB40 is a portable lithium-ion battery jump starter pack that delivers 1,000-amps (7,000 J3S) for jump starting a dead battery in seconds.

It features a patented safety technology that provides spark-proof connections and reverse polarity protection making safe and easy for anyone to use.

It's a powerful battery booster that doubles as a portable power source for recharging USB devices, like a smartphone, tablet and more.

And designed for a car, boat, RV, truck and more with gas engines up to 6 liters, and diesel engines up to 3 liters.

A lithium battery jump starter rated at 1,000 Amps (7,000 Joules3S).

Spark-proof connections and reverse polarity protection.

Recharges USB devices, like smartphones, tablets, and more.

100 lumen LED flashlight with multiple modes, including SOS. Jump starts gas engines up to 6 liters, and diesel up to 3 liters. Provides up to 20 jump starts on a single charge.