Chrome Oil Tank Dip Stick Temperature Gauge Harley Softail 2000-2017 OEM 62896-00
PART NUMBER: 88020
Chrome Plated Temperature Gauge type, 2 7/8" dipstick
Displays 50°F to 350°F
Fits Softail 2000/Later
Replaces HD# 62896-00
3.1 Gallon Sportster King Gas Tank
Gas tank is single cap style with a right side petcock location, and a fuel capacity of 3.1 gallons. Tank is made 2" wider than stock and includes stock style mounts.
Fits: Sportster Models 1958 - 1994
Top Length: 16"
Bottom Length: 13"
Rear Width: 6"
Front Width: 10"
Rear Height: 3"
Front Height: 8"
Front Tunnel Height: 3.5"
Rear Tunnel Height: 1.5"
Tunnel Length: 16"
Top Tunnel Width: 2 1/8"
NOTE: 38-0106 & 38-0107 use early style bayonet/cam gas cap, 38-0118 & 38-0086 use early screw in style cap
American Classic Motors
Shopping for someone else but not sure what to give them? Give them the gift of choice with a American Classic Motors gift card.
Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.
Daytona High Volume High Performance Oil Pump 2006-2017 Harley Twin Cam 96, 103
PART NUMBER: 601826 or 688278
Fitment: 2007 & Up Twin Cam & 2006 & Up Dyna
Performance Oil Pump for Twin Cam 96 & 103 Motors
High Volume High Pressure Oil Pumps for Twin Cams Size matters!
These oil pumps feature a massive 53mm trochoid rotor for unsurpassed scavenge volume and pressure, even at low RPMs (see charts).
The cam support plate adaptor makes them compatible with the stock OEM or Screamin Eagle cam support plate and atftermarket billet aluminum cam support plates.
Help to reduce oil carryover during high rpm operation; higher volume helps reduce engine and oil temperatures
53mm diameter rotors for maximum performance
Gain of 20% oil pressure, 125% pressure volume and 135% scavenge volume over OEM stock TC88 oil pumps
Gain of 16% oil pressure, 66% pressure volume and 100% scavenge volume over OEM stock TC96 oil pumps
High-quality die-cast aluminum body construction, high-strength steel gear construction
Fit both stock and aftermarket cam support plates for seamless installation
Replacement OEM Cast Oil Pump Assembly For Harley Sportster 1991-2019
PART NUMBER: 67084
FITS: 1991 to present Sportsters, and 2001 to present Quad Cam Buells
Replacement oil pump assembly for Sportster models
Use this high quality pump manufactured with OEM specifications with confidence
Kit Includes Oil Pump Assembly Pre Built.
All four bolts are included, 2 that hold the body together during shipment and for install.
The other two are included for mounting to the engine.
One new gasket is included.
2 Hose Clamps for your Oil Lines and the necessary inlet and outlet fittings.
We run this same oil pump on our Drag Bikes,
can't go wrong with this one!
5 Gallon Flat Side Replacement Split Fat Bob Gas Tank Set
5 Gallon Flat Side Replacement Gas Tank Set
Part Number 38-0152 Fits 84-99 Softail Models
Gas tank is a two piece tank with a fuel capacity of 5.0 gallons, and a left side petcock opening.
Flatside tank features an updated shape which tapers from front to rear.
Tank accepts caps for stock style bungs.
Top Length: 18-1/2"
Bottom Length: 17-3/4"
Rear Width: 3"
Front Width: 7-1/2"
Rear Height: 2"
Front Height: 8-1/2"
Part Number 38-0542 Fits 1947-1984
Bobbed gas tank set accepts stock dash and speedometer.
Tank has a 5.0 gallon fuel capacity.
Tank features left side petcock hole. Petcock hole is 3/8" NPT to accept a male petcock.
The tank is equipped with a bayonet style bung. Bayonet style cap set can be used.
The tank accepts a 1966-1971 emblem set with installation of emblem mounts.
Ultima Black Oil Pump 1992-1999 Harley Evolution, Big Twin, EVO Motor Engine
PART NUMBER: 98-520
BLACK WRINKLE OIL PUMP FITS 1992-1999 HARLEY 1340CC 80" EVOLUTION BIG TWIN MODELS
LIKE SOFTAIL DYNA ROAD KING ELECTRA GLIDE ROAD GLIDE TOURING ETC.
Will not fit 1450cc 88" 1999 Dyna & Touring models.
Made by Midwest Motorcycle Supply / Ultima
Forged & Black Wrinkle Painted Body
Includes all necessary gaskets & hardware.
Great performing & looking oil pump for a fraction of the cost of OEM or S&S
Bobbed 3.5 Gallon Split Steel Gas Tank Tanks 1947-1984 Harley Shovelhead, Panhead
PART NUMBER: 38-0112
Replaces OEM No: 61219-83
Gas tank set uses 1975-up petcock with nut and has a fuel capacity of 3.5 gallons.
Features left side petcock outlet.
Tank accepts stock dash and speedometer and features bobbed tank type mounts.
Order screw bung cap set separately. Check petcock opening, making sure the petcock can be easily installed.
Petcock fitting should be masked or plugged during painting for easy installation of petcock. Carefully check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit to clean, condition, and seal to help stop leaks and prevent corrosion. All tanks or tank sets will require hand fitting to give correct alignment for dash and fuel line fitment. Dash will also have to be shimmed when installed, to achieve correct height.
Top Length: 18-1/4"
Bottom Length: 17-3/4"
Rear Width: 2-1/2"
Front Width: 5"
Rear Height: 1-1/4"
Front Height: 8-1/4"
Suggested to use #35-0591 petcock for backward outlet.
Suggested to use #35-0595 petcock for forward outlet.
Fat Bob Split Tank Gas Caps Chrome Dual Pair Vented Evo 1996-2017 Harley Softail
PART NUMBER: 38-0320
Flat Side Fat Bob Tank Gas Caps Pair
FITS: 1996 and Up HARLEY SOFTAIL FXST
1996 and up FLST SOFTAIL MODELS
This chrome steel gas cap set is ratcheting type.
The right cap is vented and the left side is non-vented.
Caps are screw in type.
1 lefthand thread, 1 righthand thread
Gas Caps for 1983-1995 models are part number 38-0321, Please contact for availability
Chrome Sifton Oil Pump 1973-1991 Harley Big Twin Shovelhead Evolution Motor FXST
PART NUMBER: 12-9972
CHROME SIFTON OIL PUMP
FITS 1973-1991 MODELS
Features Improved Oil Pump Pressure Regulation That Will Ensure Correct Oiling To All Areas Of BT Engines.
This Pump Kit Includes All Necessary Fittings, Snap Rings, Keys, Gaskets & Mounting Bolts.