Feuling High Flow Cam Support Plate Chain Drive Camshaft Harley 99-06 Twin Cam

BRAND NEW

PART # 8010

FITS: 1999-2005 Dyna, 2000-2006 Softail, 1999-2006 Touring

Feuling® HIGH FLOW cam plates for T/C® engines increase engine oil flow and volume by enlarging the oil pump reservoirs and critical oil passages, including matching the oil port holes throughout the cam plate to the port holes in the engine case increasing engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings resulting in 25-35 degree cooler engine temperatures

Made from 7075 billet aluminum, which is 50% harder and stronger than the factory, SE and other aftermarket cam plates; the 7075 increases the strength and hardness of the cam plate, holding tighter tolerances under temperature, eliminating flexing and the need for bronze bushings as 7075 material has excellent bearing-like properties

Feuling® cam plates are blueprinted and matched to the Feuling® oil pumps, which allow the Twin Cam engine to take full advantage of the increased volume from the high-flow oil pumps, resulting in cooler and quieter engine operation

Tighter cam bearing bore tolerance for improved press fit

Cam plates are pressure-tested; pressure relief valve and spring are pre-set and designed for increased volume and pressure, eliminating the need to stretch the spring or use of a shim

When matched with the Feuling Race Series Oil Pump, rear wheel power gains of three Horsepower and 4 ft/lbs of Torque are achieved

For use ONLY with the Feuling® oil pumps

Bolts into stock location

Great for those who have already upgraded their early-style engine and like their existing camshafts

Cam plate includes bearing retainer plate and hardware

Require the purchase of "factory" hydraulic chain drive tensioners

For use ONLY with Feuling® oil pumps PART#s 7060 and 7062

Made in the U.S.A.

For use ONLY with Feuling® oil pumps