J&M Rokker XXRP 800w Programable Amplifier Amp w Rear Speaker Harley Road Glide
Designer: J&M Corp
- Regular
- $1,159.95
- Sale
- $1,159.95
- Regular
- $949.99
Sold Out
- Unit Price
- per
SKU
JAMP-800HR06-RCP
Free delivery to the Lower 48 States
30 Day Returns and Exchanges
Fitmet Questions? Call us at 610-754-8500
BRAND NEW
PLEASE CONTACT US FOR A LEAD TIME.
PART # JAMP-800HR06-RCP
FITS: Harley 2006-2013 Road Glide
This new J&M ROKKER XXRP DSP controlled 4-channel 800 watt RMS fairing/rear speaker amplifier kit has been designed specifically for use on the 2006-2013 Harley® RoadGlide (NOT for 2012-2013 CVO) with the stock Harley HK radio with rear-lid or lower-fairing speakers added.
The specific plug-n-play RCA input harnesses included with this amplifier kit, take the 2-channels of audio signal available from the RoadGlide version of the Harley HK radio and provides 4 separate channels of amplification at 200 watts RMS continuous power per-channel into a 2 or 4-ohm speaker load. (Manually selectable on the amplifier itself for a 2-ohm or 4-ohm speaker load)
This is a full range class D digital amplifier properly shielded against RF interference into the AM or FM stereo radio bands.
The ROKKER XXRP amplifier uses advanced digital switching power supply technology to dramatically reduce the 12v current demands on the motorcycle electrical system, compared to other brand amplifiers in this power range.
Amplifier mounts to the custom made 1-piece L-bracket system, to provide solid and secure mounting inside the RoadGlide fairing.
These new ROKKER XXRP series amplifiers are fully programmable thru the internal digital signal processor (DSP) and come out of the box already dialed in for this specific RoadGlide custom speaker configuration, to provide maximum highway performance from your Harley Davidson audio system.
To alter these DSP settings using the internal programming dongle already built into this new amplifier, (USB computer connection cable also included with this amplifier kit) our specific custom amplifier programs are now available as a consumer download from the J&M website, along with the custom Bike-Builder’s-App for those who want to fine tune their own specific amplifier adjustments.
Also included are our custom made heavy-gauge power and ground wires used for the fused battery & frame connections, along with all necessary mounting hardware & complete installation/operation instructions.
Amplifier itself measures 8 1/4” Long X 5 1/8” Wide X 1 5/8” Tall.
This new J&M ROKKER XXRP DSP controlled 4-channel 800 watt RMS fairing/rear speaker amplifier kit has been designed specifically for use on the 2011-2013 Harley® RoadGlide Ultra (NOT for CVO) with the stock Harley HK radio.
The specific plug-n-play RCA input harnesses included with this amplifier kit, take the 4-channels of audio signal available from the RoadGlide Ultra version of the Harley HK radio and provides 4 separate channels of amplification at 200 watts RMS continuous power per-channel into a 2 or 4-ohm speaker load. (Manually selectable on the amplifier itself for a 2-ohm or 4-ohm speaker load)
This is a full range class D digital amplifier properly shielded against RF interference into the AM or FM stereo radio bands.
The ROKKER XXRP amplifier uses advanced digital switching power supply technology to dramatically reduce the 12v current demands on the motorcycle electrical system, compared to other brand amplifiers in this power range.
Amplifier mounts to the custom made 1-piece L-bracket system, to provide solid and secure mounting inside the RoadGlide fairing.
These new ROKKER XXRP series amplifiers are fully programmable thru the internal digital signal processor (DSP) and come out of the box already dialed in for this specific RoadGlide Ultra speaker configuration, to provide maximum highway performance from your Harley Davidson audio system.
To alter these DSP settings using the internal programming dongle already built into this new amplifier, (USB computer connection cable also included with this amplifier kit) our specific custom amplifier programs are now available as a consumer download from the J&M website, along with the custom Bike-Builder’s-App for those who want to fine tune their own specific amplifier adjustments.
Also included are our custom made heavy-gauge power and ground wires used for the fused battery & frame connections, along with all necessary mounting hardware & complete installation/operation instructions.
Amplifier itself measures 8 1/4” Long X 5 1/8” Wide X 1 5/8” Tall.
This new J&M ROKKER XXRP DSP controlled 4-channel 800 watt RMS fairing/rear speaker amplifier kit has been designed specifically for use on the 2006-2013 Harley® RoadGlide (NOT for 2012-2013 CVO) with the stock Harley HK radio with rear-lid or lower-fairing speakers added.
The specific plug-n-play RCA input harnesses included with this amplifier kit, take the 2-channels of audio signal available from the RoadGlide version of the Harley HK radio and provides 4 separate channels of amplification at 200 watts RMS continuous power per-channel into a 2 or 4-ohm speaker load. (Manually selectable on the amplifier itself for a 2-ohm or 4-ohm speaker load)
This is a full range class D digital amplifier properly shielded against RF interference into the AM or FM stereo radio bands.
The ROKKER XXRP amplifier uses advanced digital switching power supply technology to dramatically reduce the 12v current demands on the motorcycle electrical system, compared to other brand amplifiers in this power range.
Amplifier mounts to the custom made 1-piece L-bracket system, to provide solid and secure mounting inside the RoadGlide fairing.
These new ROKKER XXRP series amplifiers are fully programmable thru the internal digital signal processor (DSP) and come out of the box already dialed in for this specific RoadGlide custom speaker configuration, to provide maximum highway performance from your Harley Davidson audio system.
To alter these DSP settings using the internal programming dongle already built into this new amplifier, (USB computer connection cable also included with this amplifier kit) our specific custom amplifier programs are now available as a consumer download from the J&M website, along with the custom Bike-Builder’s-App for those who want to fine tune their own specific amplifier adjustments.
Also included are our custom made heavy-gauge power and ground wires used for the fused battery & frame connections, along with all necessary mounting hardware & complete installation/operation instructions.
Amplifier itself measures 8 1/4” Long X 5 1/8” Wide X 1 5/8” Tall.
This new J&M ROKKER XXRP DSP controlled 4-channel 800 watt RMS fairing/rear speaker amplifier kit has been designed specifically for use on the 2011-2013 Harley® RoadGlide Ultra (NOT for CVO) with the stock Harley HK radio.
The specific plug-n-play RCA input harnesses included with this amplifier kit, take the 4-channels of audio signal available from the RoadGlide Ultra version of the Harley HK radio and provides 4 separate channels of amplification at 200 watts RMS continuous power per-channel into a 2 or 4-ohm speaker load. (Manually selectable on the amplifier itself for a 2-ohm or 4-ohm speaker load)
This is a full range class D digital amplifier properly shielded against RF interference into the AM or FM stereo radio bands.
The ROKKER XXRP amplifier uses advanced digital switching power supply technology to dramatically reduce the 12v current demands on the motorcycle electrical system, compared to other brand amplifiers in this power range.
Amplifier mounts to the custom made 1-piece L-bracket system, to provide solid and secure mounting inside the RoadGlide fairing.
These new ROKKER XXRP series amplifiers are fully programmable thru the internal digital signal processor (DSP) and come out of the box already dialed in for this specific RoadGlide Ultra speaker configuration, to provide maximum highway performance from your Harley Davidson audio system.
To alter these DSP settings using the internal programming dongle already built into this new amplifier, (USB computer connection cable also included with this amplifier kit) our specific custom amplifier programs are now available as a consumer download from the J&M website, along with the custom Bike-Builder’s-App for those who want to fine tune their own specific amplifier adjustments.
Also included are our custom made heavy-gauge power and ground wires used for the fused battery & frame connections, along with all necessary mounting hardware & complete installation/operation instructions.
Amplifier itself measures 8 1/4” Long X 5 1/8” Wide X 1 5/8” Tall.